How do I use the sodastream Ultimate Multi-drink™ and prepare a beverage?

• Sodastream ULTIMATE Multi-drink™ sparkling drink maker User Manual

Check out the 'How-To' use video and the following steps:

1. Check you have completed these steps:
   • Install Quick Connect CO2 Cylinder
   • Fill with cold water and install the water tank
   • Install the flavour bottle
     
     Please note – The sodastream Ultimate Multi-drink™ Sparkling Drink Make will turn to a ‘sleep mode’ after 10 minutes of being inactive. To turn it on, press any button and proceed with the following steps:
      
2. Select a drink size by pressing the Drink Size Button repeatedly until the light indicator lands on your desired selection.
   Select Drink Size*:
   S – 236 ml (8oz)
   M – 473 ml (16oz)
   L – 710 ml (24oz)
   
   Please Note:
   • "S” is the default size until you change it, and then the machine will remember your choice.
     The “M” and “L” sizes are being made in cycles, which means the machine will pull 236 ml of water from water tank, fizz them, dispense to the glass, and then will pull another 236 ml from the water tank (for “M” size), fizz them and dispense them into the glass (for "L" size, it's 3 cycles: 3 X 236 ml).

   • We recommend testing first with "S" size and see how it fits the glass you are using (for most glasses 236 ml + ice is enough).

     * The listed dosages are intended as targets and may vary depending on differences between individual units. Based on recommended serving size = dosing stage 4 (classic soda dose).
     Refer to the table below with recommendations:
     
      

3. Place an appropriately sized vessel below the Dispense Nozzle and adjust the cap base accordingly if needed. For taller vessels, like a bottle, the Drip Tray may need to be removed to fit under the Dispense Nozzle.
   
    
4. Select a Fizz level by pressing the Carbonation Level Button repeatedly until the light indicator lands on your desired selection. Refer to the chart below.
   Select Fizz Level:
   – Still (no fizz)
   • Light
   •• Medium
   ••• Strong (Recommended Serving)
    
5. Select a Flavour level by turning the Flavour Dial to your desired selection. Refer to the chart below.
   Select Flavour Level:
   0 No Flavour - Plain water
   1 Hint - 25%
   2 Light - 50%
   3 Medium - 75%
   4 Classic Soda - 100% (Recommended Serving)
   B Boost / Prime – 25% additional syrup
    
6. The Activation Button will turn static White to indicate the machine is ready - Start the drink making process* by pressing the Activation Button once. The Status LED Ring will turn on while the drink is dispensing.
   
   Once the drink is ready, the LED Ring will blink 3 times and remain illuminated.