How do I install the Sodastream Quick Connect CO2 Cylinder into the sodastream ULTIMATE Multi-drink™?

Please note that the sodastream ULTIMATE Multi-drink™ Sparkling Drink Maker is only compatible with the Sodastream® CO2 Quick Connect Cylinder and is NOT compatible with the Sodastream® CO2 Screw System Cylinder or other cylinders.

1. Remove seal and cap from the Sodastream® CO2 Quick Connect Cylinder.
2. Open the CO2 Cylinder Door on the left side of the Sparkling Drink Maker.
3. Raise the Quick Connect Cylinder handle to the ”open” position.
4. Insert the CO2 Quick Connect Cylinder, bottom first.
5. Lower the Quick Connect cylinder handle to the ”locked” position.
6. Close the CO2 Cylinder Door.
7. Press and hold the Carbonation Level Button for 3 seconds to reset the CO2 Cylinder status – the button light should change from orange to white to recognize a new cylinder has been successfully installed.
   

Note: When the CO2 level indicator turns Orange, the CO2 Cylinder is about to run out. This is the time to have a full refillable CO2 Cylinder on hand.

• One CO2 cylinder in sodastream ULTIMATE Multi-drink™ makes up to 120 236 ml glasses.