1. Support Home
  2. Getting Started
  3. Sodastream ULTIMATE Multi-drink™ Sparkling Drink Maker (with flavour dosing system)

What is required for Set Up and before the first-time use of the sodastream ULTIMATE Multi-drink™?

Set-Up the sodastream ULTIMATE Multi-drink™ Sparkling Drink Maker
 

 

  1. Remove and properly discard any packaging and tape from the Sparkling Drink Maker.
  2. Place the Sparkling Drink Maker on a flat stable surface.
  3. Assemble the Drip Tray into place. 
  4. Rinse the Flavour Connect Cap and Water Tank.

    Note: The Water Tank should be filled ONLY with still WATER! Use ice cold water for best results 
  5. Connect the power adapter:
    1. Connect the plug that fits your local outlet to be a power adapter.
    2. Check the power cord placement at the back of the Sparkling Drink Maker and insert the plug.
    3. Insert the adapter into a power outlet. The Status Lights will turn White, then turn off. The Drink Size Lights will turn solid Orange.
Run a Rinse Cycle before the first use
 

 

  1. Place a Small sized glass under the nozzle
  2. Choose Drink Size "S"
  3. Choose Carbonation Level "Still" (-)
  4. Set Flavour Dial to "2"
  5. Press the Activation Button
  6. Discard the liquid from the glass
  7. Your sodastream ULTIMATE Multi-drink™ is ready for carbonation!